If you’re a skateboarder, you know the importance of having high-quality bearings. Not only do they make skating a lot more fun, but they also help you perform at your best. In this blog post, we will discuss the best skateboard bearings on the market right now. We’ll give you a brief overview of each one and tell you why we think they’re so great. So whether you’re a beginner or an experienced skater, these bearings are sure to please!
Should You Get Ceramic Or Steel Bearings?
Steel and ceramic bearings both have their own advantages and disadvantages. If you’re looking for a more affordable option or are planning on gapping or ollieing down staircases, you should go with steel skateboard bearings. However, if you have the budget and want more durability, speed, and reliability, ceramic skateboard bearings are the way to go.
Steel skateboard bearings have been the industry standard for many years, due to their durability and affordability. However, the quality of steel can vary greatly, and higher-grade steel is often used in premium bearings for better performance.
Steel bearings are also more susceptible to rusting when exposed to moisture, so it is important to keep them well-oiled and dry.
If they do get wet, be sure to lube them up again and avoid rolling through puddles or skating in the rain. If you need to dry them quickly, putting them by a heater is the best option. By following these simple tips, you can ensure that your steel bearings will last for years to come.
Ceramic bearings are a type of bearing that uses balls made out of a ceramic material. Ceramic is a hard and brittle substance that is heat resistant and does not rust when exposed to moisture.
The benefits of using ceramic bearings include the fact that they are harder than steel and deform less when pressure is applied to them. Ceramic bearings are also heat resistant and expand less, meaning that they create less friction at faster speeds. In addition, ceramic bearings do not rust when exposed to moisture, making them ideal for use in skateboards that will be exposed to water or moisture.
However, the downside to ceramic bearings is that the ceramic material is brittle and can break if skateboarded under high impact. For this reason, ceramic bearings are best suited for commuting and low-impact skating, but not for skating big gaps or stair sets.
What Should You Look For In A Skateboard Bearing?
You need your skateboard bearings to be fast, durable, and robust. Bearings are one of the most important pieces on your skateboard. The better quality your bearings are and the better you treat them, the smoother your ride will be. A smooth ride will mean a world of difference once you’ve experienced skateboarding on a rough road.
Skateboard bearings should be:
Now that we’ve gone over what to look for in a skateboard bearing, let’s take a look at the best bearings on the market!
Best Skateboard Bearings in 2022
- Bones Reds
- Bones Swiss
- Bones Super Swiss 6
- Fireball Dragon Bearings (Race)
- Fireball Dragon Bearings (Built)
- Fireball Dragon Bearings (Ceramic)
- Bronson Speed Co. G2
- Bronson Speed Co. G3
Bones REDS have been the standard in skateboard bearings for decades. They are high quality, long-lasting, and easy to clean with removable rubber shields. With a high-speed nylon ball retainer, they are built for skateboarding and come pre-lubricated with Speed Cream.
These bearings are fast, smooth, and durable, making them ideal for any level of skater. Whether you are just starting out or a veteran of the sport, Bones REDS are the perfect choice for your skateboard bearings.
When it comes to skateboard bearings, there is simply no comparison to Bones Swiss. In terms of performance and durability, Bones Swiss bearings are in a class of their own.
What sets them apart from the competition is their single, removable, non-contact rubber shields. This design allows you to clean and lubricate your bearings as needed without fear of damaging them. Additionally, the non-contact construction of the shields prevents bent or damaged shields from interfering with the free movement of the internal components – something that is all too common with inferior metal-shielded bearings.
Yes, Bones Swiss bearings come at a higher price point than some other brands on the market. But when you consider that they are faster, smoother, and longer-lasting than anything else out there, it’s easy to see why they are worth every penny.
Bones Super Swiss 6
The Bones Super Swiss 6 skateboard bearings are a unique design that offers many advantages over traditional bearings. The six larger diameter balls create a quicker acceleration and greater strength, while the Swiss-manufactured components offer unparalleled durability.
These are some of the highest quality bearings on the market, ever. The precision construction and high-quality materials of the Bones Super Swiss 6 skateboard bearings provide an incredibly smooth and fast ride.
Whether you’re looking for a bearing that can handle the rigors of competitive skating or just want the peace of mind that comes with knowing you’re riding on the best, the Bones Super Swiss 6 is a perfect choice.
Fireball Dragon Bearings (Race)
The Fireball Dragon Race Bearings are one of the fastest bearings on the market. With a premium lubricant made from light oil, these bearings offer a smooth and fast ride with reduced friction. Right out of the box you will have an unmatched, smooth, fast ride.
- The labyrinth seals help keep dirt and gunk out of your bearings, making them last up to 50% longer.
- The precision steel ball bearings offer reduced friction and more durability.
These bearings have been tested at numerous races, slide jams, free ride sessions, downhill runs, park sessions, street sessions, cruising, and dancing. The Races have proven to perform at their peak, even months after installation. So whether you’re racing, sliding, free riding, or just cruising around town, these bearings will perform at their peak.
Fireball Dragon Bearings (Built)
Fireball Dragon’s Built are designed from the ground up for skateboarding, with features that other bearings on the market don’t offer. The signature Labyrinth shields help prevent dirt and debris from getting inside the bearing, drastically improving the overall performance and life of your bearings.
Fireball is so confident that they offer a lifetime warranty on the entire range! The Fireball Built bearings use the same heavy grease as the Endure skateboard bearing. However, this bearing is designed for reduced slop (bearing movement) and perfect alignment, eliminating the need for separate spacers.
Each bearing uses the highest grade steel and comes complete with a Nylon ball cage for reduced friction for a fluid roll and Labyrinth seals for improved longevity and lubrication retention. These bearings are designed to last. Install them and forget.
Fireball Dragon Bearings (Ceramic)
When it comes to skateboarding, having the right bearings can make all the difference. That’s why Dragon offers their signature ceramic bearings, designed specifically for skateboarding. Unlike other bearings on the market, Dragon’s bearings feature labyrinth shields to help prevent dirt and debris from getting inside and potentially damaging the bearing.
The ball bearings inside the case are made out of silicone nitride ball bearings. Silicone nitride are higher quality ceramic balls for skateboarding. In addition, they’re lubricated with a race oil formula that ensures a smooth and fast ride right out of the box.
Because they’re made of hybrid ceramic, they boast superior speed and performance that will last for months after installation. So if you’re looking for the best possible ride, make sure you choose Dragon ceramic bearings. And remember, all Dragon Bearings come with a lifetime guarantee against defects.
Bronson Speed Co. G2
The Bronson Speed Co. G2 skateboard bearings deliver top-shelf performance with affordability in mind. Straight edge, friction-less shields are pop-off resistant to hold in oil and keep moisture out, while linear micro-groove surfaces improve bearing lubrication and increase roll speed.
Nano-ceramic compounds resist corrosion and prevent excessive wear. Bronson Speed Co. crammed all this tech into these bearings for a reason: to give you the smoothest, longest-lasting roll at a reasonable price.
For a mid-price bearing, these are good. They are similar to Bones Reds, maybe slightly less fast. However, they have a smooth, consistent roll and are good for moderate-speed maneuvering. Bronson Speed Co. G2’s are great bearings for the price point and I would recommend them to anyone needing a good set of bearings on a budget.
Bronson Speed Co. G3
When it comes to skateboard bearings, Bronson Speed Co. is a company that is constantly innovating and trying to improve upon the status quo. The company was established in 2013 and has quickly become a global leader in the industry due to its reinvented skateboard bearings, which are described as the “next generation of bearings.”
Thanks to their use of accurate product testing technologies, Bronson Speed Co. has been able to create skateboard bearings that are faster and more durable than any other option on the market.
In addition, the company’s G3 skateboard bearings are specifically designed to resist friction and provide a smooth ride. Consequently, Bronson Speed Co. is a company that any serious skateboarder should keep an eye on.
How Do You Put Bearings Into Your Skateboard?
You put bearings in your skateboard wheels to make them spin faster and easier. Here is a step-by-step guide on how to put bearings in your skateboard wheels:
- Start by taking the axle nut off of one of the trucks.
- Next, remove the speed ring from the inside of the wheel. (if you use them)
- Then, gently push the bearing out of the wheel from the inside.
- Once the old bearing is out, put the new bearing in its place.
- Finally, put the speed ring and axle nut back on the truck. Repeat this process for all of the other wheels on your skateboard. Now you’re ready to roll!
In conclusion, the best skateboard bearings are the ones that best suit your individual skating style and needs. There is no single “best” type of bearing, as different skaters will prefer different things. However, all of the bearings mentioned in this article are high-quality and well-reviewed, so you can’t go wrong with any of them.