What are Skateboard Trainers and How Do They Work?

If you’re a skateboarder, then you know that the best way to improve your skills is by practicing as often as possible. But what do you do when it’s too cold outside or there’s no skatepark around? That’s where skateboard trainers come in! Skateboard trainers are devices that allow you to skate indoors, and they work by attaching to the bottom of your skateboard.

In this article, we will discuss how skateboard trainers work, and we’ll also take a look at some of the best skateboard trainer products on the market!

Do Skateboard Trainers Actually Work?

This is the number one question that people ask about skateboard trainers, and the answer is YES! Skateboard trainers work by simulating the feeling of skating on concrete, and they also keep your skateboard from moving around when you’re trying to do tricks.

One of the things that can happen when you’re skateboarding without a trainer is that sometimes the wheels will land slightly crooked, which can cause the skateboard to wobble back and forth. This isn’t a problem with skateboard trainers because they keep the wheels in place so that you can focus on landing your tricks!

Are Skateboard Trainers Worth It?

If you’re serious about learning how to skate or improve your skateboarding skills, then we definitely recommend getting a skateboard trainer. They’re relatively cheap and easy to install, and they will save you a lot of time practicing and learning new tricks and maneuvers. Most skateboard instructors encourage people who are learning for the first time to use skateboard trainers.

Skate Trainers 101: How Do Skate Trainers Work?

If you’re new to skateboarding, or even if you’ve been skating for a while but haven’t tried using a skate trainer before, you might be wondering how these devices work. Skate trainers are devices that attach to the bottom of your skateboard and simulate the feeling of skating on concrete.

They keep the optimal pop you get from concrete and allow you to spin/flip the skateboard in any direction. This is a great way to practice new tricks or just improve your overall skateboarding skills.

So if you’re ready to take your skateboarding to the next level, be sure to check out some of the best skate trainer products on the market! Thanks for reading!

How To Install Skateboard Trainers

Pull each skateboard trainer over your wheels. They are stretchy. Don’t worry though, you won’t stretch or rip them, and they fit every size of skateboard wheel.

While the skateboard trainers are on your skateboard you will have incredible balance for trying flip tricks. Try some tricks that might usually be out of your league.

Here’s how to install and remove the skateboard wheel stoppers:

  1. Set the skateboard on your lap with the wheels facing up.
  2. Grab the outside of the skater trainers and stretch them out.
  3. Pull them over the wheel.
  4. Repeat on all four wheels.

To remove skater trainers, all you need to do is pull hard until they come off. Do not worry about ruining them. They’re quite durable.

How Do You Ollie With Skateboard Trainers?

Skater trainers are the equivalent of training wheels for a skateboard. They provide you with all the balance necessary to learn flip tricks. However, they also give a huge boost to your confidence.

  1. Get your feet into position. The ball of your toe should be in the middle of the tail and your front foot should be near the center of the board.
  2. Practice stomping down on the tail to form muscle memory.
  3. Practice sliding your front foot to the nose of the board.
  4. Try combining all three steps above to ollie.

Best Skateboard Trainers in 2022

Skateboard trainers are a great way to improve your skateboarding skills and confidence. They are easy to install and use, and they can help you learn new tricks or perfect the ones you already know. Skater Trainers are the best skateboard trainer on the market, and we highly recommend them to anyone looking to improve their skateboarding skills!

They are made of high-quality materials and they are very easy to install. They also come in a variety of colors so you can choose the ones that best match your skateboard setup.

If you’re looking for a skate trainer that is durable and easy to use, we highly recommend checking out Skater Trainers!

How To Make Your Own Homemade Skater Trainers

When making your own skateboard trainers you need to keep in mind wheel size. DIY skateboard trainers will typically only fit wheels that are 56mm or smaller. That being said, you probably aren’t using wheels bigger than that if you’re doing street skating or shredding skateparks.

What you need:

  • Tennis balls (x4)
  • X-afto knife

To make your own skater trainers is quite easy. Simply, make a small incision on the tennis ball and try to fit it over your wheel. The tennis ball should look like Pac-Man with an open mouth as you try to stretch it open.

If the tennis ball doesn’t fit over the wheel easily, make the cut slightly bigger. You don’t want to make the cuts too large though, or else the tennis ball can fit a bit loose over the wheels.

Conclusion

If you’re just getting started with skateboarding, one of the most important things you can do is invest in a good set of skateboard trainers. Skateboard trainers simply stretch over your wheels and stop them from rolling so you can focus on the steps of the trick without worrying about falling.

You can practice more, fall less, get your confidence up, and develop some muscle memory with skateboard trainers. Once you have it down, take the skateboard trainers off and get your trick for real, rolling on the pavement in your element. Skater trainers fit every wheel size and are very tough and durable.

Similar Posts